Maytag Washing Machine Error Codes

If your Maytag washing machine displays an error code, don’t panic. These codes are designed to alert you to specific issues and help you troubleshoot effectively. Below is an expanded guide to the most common error codes and how to address them.

Maytag Washing Machine Issues

If you're having trouble with your Maytag washing machine, it could be something simple like an unbalanced load, a clogged drain, or an issue with the power supply. Double-check that the door is securely closed, and ensure the machine is on a stable, level surface. For error codes, try consulting the user manual or resetting the machine by unplugging it for a few minutes. If the problem persists, it might be time to call in a technician.

Error Codes for Top-Loading Maytag Washing Machines

Error Code	Meaning	Solution
Drn	Draining issue	Review the washer hose installation to ensure the hose is installed correctly.
F#, E#, F##	System error	Press Start/Pause to clear the code, then press it again to restart the washer. If the issue persists, contact a professional.
HC	Hot and cold inlet hoses installed in reverse	Turn off the water supply and swap the hoses so that each is connected to the correct inlet.
LdL	Lid cannot lock	Check the locking mechanism for any obstructions that are preventing the lid from locking properly.
LdU	Lid cannot unlock	This usually occurs when items are placed on top of the washer lid. Remove any items from the lid to allow it to unlock.
LF, Lo FL, F8 E1	Fill cycle takes too long	Check the water supply in your home to ensure that both the hot and cold water supplies are active.
Lid	Lid left open	Close the lid to clear the code.
Ofb	Unbalanced load	If the washer has stopped, open the washer, evenly redistribute the load, and then close the lid and restart the cycle.
OL	Oversized load	If the washer has stopped, remove several items from the basket and restart the cycle.
PF	Power failure	Touch and hold Start to restart the washer cycle after it was interrupted by a power failure. Press Power if you only need to clear the code.
Sud	Excessive suds	Ensure you used the correct detergent. Open the lid and allow the water to drain, then manually remove the excess suds.

Error Codes for Front-Loading Maytag Washing Machines

Error Code	Meaning	Solution
LOC, LC	Control lock activated	Press the control lock button. Some models require you to press and hold the button, while others require a single press.
dET	Detergent cartridge was not detected	Ensure the cartridge is inserted into the dispenser drawer correctly. If you are using single-load doses of detergent, ignore this message.
Int	Cycle interrupted	Press the pause or cancel button twice. If the code does not clear, disconnect the washer for one minute.
rL, F34	Items detected during a clean washer cycle	Remove the items from the basket and restart the cycle.
Sud, Sd	Excessive suds	This code will automatically clear as the washer takes additional time to clear the water and suds. Ensure you use the correct detergent and check the drain hose for any kinks or clogs.
F5 E2	The Door is not locking properly	Ensure that there are no items blocking the door’s locking mechanism.
F7 E1	Motor speed sensing error	Check for any remaining shipping bolts and ensure the washer load is not excessive.
F8 E1, LO FL	Low water flow	Check your home’s water system to ensure that the flow is functioning. If the flow rate is fine, make sure your water inlet hoses are not kinked or clogged.
F8 E2	Dispenser system issue	Select models only. Ensure the detergent drawer or cartridge is not clogged with detergent.
F9 E1	Excessive drain time	Make sure the drain hose is not clogged or kinked.
Other F# E# code	Other error	Disconnect the washer for one minute and reconnect it. If the code does not clear, contact a professional.

Professional Technician in Your Area

Encountering error codes on your Maytag washer can be frustrating. While many issues can be resolved by following the user manual, some problems may require professional assistance.

If you’ve tried troubleshooting and your washer is still not working properly, don’t hesitate to contact us. At RightFix, we specialize in diagnosing and repairing all types of washer issues, including Maytag models.

Our experienced technicians ensure fast and reliable service to get your appliance back in perfect working condition.

📅 Book your repair appointment today and Get $25 OFF: Schedule Here

Let us take the hassle out of washer repairs so you can get back to your routine stress-free!