How To Get Rid Of F21 Error Code On The Kenmore Washer?

How To Get Rid Of F21 Error Code On The Kenmore Washer

You may be frustrated if your Kenmore washer displays the F21 error code. This error commonly happens when the washing machine stops mid-cycle due to drainage issues. Don't worry—you can usually repair this yourself. This tutorial will explain the F21 error's causes and how to repair them.

What does the Kenmore Washer F21 Error Code Mean?

Kenmore washers with the F21 fault code have problems emptying water. The F21 code stops or refuses the washing cycle if the washer takes more than 8 minutes to empty the drum.

This code might be caused by a blocked drain or a broken pump motor. We'll describe these issues and offer remedies below.

Reason #1: Blocked Drain Line or Pump

Blocked Drain Line or Pump

Blockages in drain lines or pumps are major reasons of the F21 error. Any clog in the drain pipe might impede or stop the washer's draining. Lint, grime, and even forgotten items from your garments pockets can clog the hose over time.

A clogged drain pipe shows:

Slow drum drainage or standing water.
The washer makes strange sounds like gurgling or grinding when pumping water out.
With F21 displayed, the washer stopped mid-cycle.

Reason #2: Clogged Drain Pump Filter

Clogged Drain Pump Filter

Kenmore washer drain pump filters remove trash before it enters the pump. Lint, socks, and other debris can block this filter over time. Blocking the filter prevents the washer from draining water adequately, causing the F21 error.

Clogged drain pump filter symptoms:

Poor washer drainage or saturated garments.
Loud washer draining noises.
Frequent F21 error code, especially at heavy loads.

Reason #3: Faulty Pump Motor

Faulty Pump Motor

Even if the drain line and pump filter are clean, the F21 error may be due to the pump motor. Drum water is actively removed by the pump motor. It might wear out or break, preventing effective drainage.

Pump motor failure symptoms include:

No washing machine draining sound.
Water stays in the drum after the cycle.
After cleaning the filter and hose, the washer fails to drain with the F21 error.

How to Troubleshoot and Fix the F21 Error

After reviewing the reasons of the Kenmore washer F21 problem, let's diagnose and solve it. Follow these procedures carefully to fix your washer.

Step #1: Reset the Washing Machine

Reset the Washing Machine

Reset the washer before examining its mechanical parts. Minor system glitches can trigger the F21 code. To reset washer:

Remove the washer from electricity for 10 minutes.
Plug it in and restart after waiting.
Test for error code recurrence.

Your washer may require a reset if the error doesn't return. Proceed if the F21 problem remains.

Step #2: Remove and Clean the Drain Pump Filter

Remove and Clean the Drain Pump Filter

Check and clean the drain pump filter if resetting didn't work. So how:

Turn off and unplug the washer for safety.
Find the drain pump filter. This is behind a little access panel at the front bottom of most Kenmore washers.
A cloth or container should collect any water that spills out when you open the filter.
Take off the filter cap and remove lint, hair, and other things.
After cleaning the filter, reattach the cover and test the washer.

The pump filter should be cleaned regularly to prevent obstructions and improve washer drainage.

Step #3: Check and Replace the Pump Motor if Necessary

Check and Replace the Pump Motor if Necessary

If cleaning the drain filter doesn't fix the F21 problem, check the pump motor. Check and perhaps replace the motor:

Unplug the washer.
Remove the washer's lower front panel to reach the pump motor.
Look for fractures, burns, or disconnected wires on the pump motor.
The pump motor must be replaced if it seems defective. This may be complex, so if you're new to washer repairs, see a specialist.

Replace a defective pump motor to improve washer drainage and eliminate the F21 error.

Professional Repair Assistance for Kenmore Washers

After following the methods above, you may need expert help to fix the F21 problem code. RightFix specializes in Kenmore washer repairs and can swiftly identify and rectify F21 problems. Our professionals can fix a clogged filter, drain line, or pump motor.

Areas We Serve for Kenmore Washer Repairs

RightFix provides Kenmore washer repair in numerous places, assuring fast service in the following areas:

We offer rapid, dependable Kenmore washer servicing in these regions.

Professional Kenmore Washer Repair Services

RightFix repairs all Kenmore washer models. From F21 errors to sophisticated repairs, our skilled experts can fix any washer issue.

Our services include:

Unclogging drains and filters.
Pump motor replacement.
Control board repair or replacement.
Regular washer maintenance keeps it functioning.

We can fix a blocked pump filter or a washer that shakes violently during the spin cycle quickly and professionally.

Conclusion

Kenmore washer F21 error codes mainly indicate drainage concerns. Most problems may be fixed by resetting the machine, cleaning the drain pump filter, or replacing the pump motor. If the issue persists, contact RightFix for expert repair.

Our expert technicians are always available to assist you keep your Kenmore washer running properly. We're one phone away with services in numerous places!