How to Fix GE Oven Error Code F2

Encountering an F2 error code on your GE oven can be frustrating, especially if you're in the middle of preparing a meal. This error usually indicates an overheating issue, but the cause can vary. It might be a simple glitch, a blocked vent, or even a damaged temperature sensor.

In this guide, we'll walk you through five possible causes of the F2 error code and how to troubleshoot them effectively.

Get Professional Help Today!

1. Is the F2 Error Code Caused by a Glitch?

Before diving into complex repairs, it’s worth checking whether the F2 error is just a temporary glitch in the oven’s control system. Power surges or software bugs can sometimes trigger error codes, even when there’s no real issue.

How to Reset Your GE Oven

1. Turn off the oven: Locate the circuit breaker connected to your oven and switch it off.
2. Wait 10–15 minutes: This allows the internal system to reset.
3. Turn the oven back on: Restore power and check if the error persists.

If the error disappears, it was likely a temporary glitch. However, if it returns, move on to the next troubleshooting step.

2. Are the Vents Blocked?

Proper ventilation is crucial for maintaining a safe operating temperature in your oven. If the vents are blocked, heat can build up excessively, triggering the F2 error.

Steps to Check for Blocked Vents

• Inspect the oven vents for any obstructions like food debris or grease buildup.
• Ensure adequate airflow around the oven, especially if it’s built into cabinetry.
• Clean the vents using a vacuum or a damp cloth to remove any blockages.

If poor ventilation was the problem, the error should clear once the airflow is restored.

3. Self-Cleaning Oven Damage

The self-cleaning cycle in GE ovens reaches extremely high temperatures to burn off food residue. However, this heat can sometimes damage internal components, including the temperature sensor or control board, leading to an F2 error.

What to Do

• If the error appeared right after running a self-clean cycle, allow the oven to cool completely and reset it.
• Avoid using self-cleaning too frequently, as repeated exposure to high heat can degrade the oven’s internal parts.
• If the error persists, check the temperature sensor for damage.

4. Defective Temperature Sensor

The oven’s temperature sensor (or thermistor) monitors the internal heat levels. If it malfunctions, it may incorrectly signal the control board, causing the oven to think it’s overheating when it’s not.

Test the Oven Sensor

To determine if the temperature sensor is faulty:

1. Unplug the oven or switch off the circuit breaker for safety.
2. Locate the sensor: It’s usually a thin metal rod positioned at the back of the oven interior.
3. Use a multimeter to test the sensor’s resistance. It should read approximately 1,080 ohms at room temperature.
4. If the resistance is significantly different, the sensor is defective and needs to be replaced.

If you’re not comfortable testing electrical components, consider contacting a professional technician.

5. Damaged Control Board

If all other components appear functional but the F2 error persists, the oven’s control board may be the culprit. The control board regulates temperature and manages all electronic functions. A fault in this board can misinterpret sensor signals and trigger an error.

Signs of a Faulty Control Board

• The oven overheats despite normal settings.
• Buttons become unresponsive or display random error codes.
• The oven shuts off unexpectedly during use.

How to Fix It

1. Try a reset (as mentioned earlier) to rule out a software glitch.
2. Inspect the control board for burnt areas, loose wires, or corrosion.
3. If damage is visible or the oven continues malfunctioning, the board will likely need professional repair or replacement.

Final Thoughts

The GE oven F2 error code is usually related to overheating, but pinpointing the exact cause is crucial. Start with a simple reset, check for blocked vents, and inspect the temperature sensor. If those steps don’t resolve the issue, the self-cleaning feature or control board might be responsible.

For complex repairs, it’s always best to consult a professional—especially if electrical components need testing or replacement. If you're in need of expert oven repair services, RightFix is here to help. Contact us for fast, reliable oven troubleshooting and repairs.

Get Professional Help Today!