Whirlpool Washing Machine Error Codes

Is your Whirlpool washing machine showing a puzzling combination of numbers and letters and refusing to operate? Our appliance specialists have put together this guide to help you understand Whirlpool washing machine error codes. Read on to discover what these error messages mean and how to resolve them.

Quick Solutions for Whirlpool Washing Machine Error Codes Before reaching out to your local RightFix, try these simple steps to clear some of the most common Whirlpool washing machine error codes:

Rebalance your laundry load – Top-loading washing machines require an even distribution of weight across the drum. Ensuring an even load may help resolve certain errors.
Reset your machine – Unplug the washing machine, wait for 10 seconds, and plug it back in to reset some error codes.
Check your drain hose – A bent or obstructed drain hose can lead to leaks and error messages.

Causes of Whirlpool Washing Machine Error Codes Many error codes stem from simple problems like an unbalanced load or a kinked drain hose. However, some codes indicate more serious issues that require professional attention. Below are some common Whirlpool washing machine error codes, their meanings, and potential solutions. If these solutions do not resolve the issue or seem too complex, seek assistance from a qualified Whirlpool appliance repair specialist.

Get Professional Help Today!

List of Whirlpool Washer Error Codes

Code	Meaning	Front-Load Washer Solution	Top-Load Washer Solution
Drn, F9 E1	The washer is not draining properly	Ensure the drain hose is not clogged or bent.	Check to ensure that the washer drain hose is properly installed or call an appliance repair specialist.
F#, E#, F##	System error code	Unplug the washer for one minute then plug it back in and rerun the cycle.	Press start and pause together once to clear the code; then press start and pause again to reset the washer.
HC	Hot and cold inlet hoses are installed in reverse	Turn off the water supply and swap the hoses.	Turn off the water supply and swap the hoses.
LdL, F5 E2	The lid fails to lock	Check for any loose items or detergent buildup preventing the lid from locking.	Check for any loose items or detergent buildup preventing the lid from locking.
LdU	The lid fails to unlock	N/A	Remove any objects from the top of the washer lid.
OL	The washer load is too large	Reduce the size of the load in the washer.	Reduce the size of the load in the washer.
LF, Lo FL, F8 E1	The washer is filling too slowly	Ensure household water supply is on and that water inlet hoses are not kinked.	Turn off your water and then inspect to see whether the water supply is properly going to the washer.
Of	The washing machine load is unbalanced	N/A	Redistribute the load in the washer then press start and pause at the same time.

Inability to Drain Water

Error codes: Drn, F9 E1
Meaning: The washing machine is not draining properly.
Solution: Check the drain hose for kinks or incorrect installation. If incorrectly installed, contact a repair professional.

System Error Code

Error codes: F#, E#, F##
Meaning: General system error.
Solution: Press the start and pause buttons simultaneously to clear the error, then press them again to reset the washer.

Reversed Inlet Hoses

Error code: HC
Meaning: Hot and cold water inlet hoses are connected incorrectly.
Solution: Turn off the water supply, switch the hoses, and run a wash cycle to verify proper function.

Lid Locking Issue

Error codes: LdL, F5 E2
Meaning: The lid is unable to lock.
Solution: Inspect the lid area and remove any detergent buildup or foreign objects obstructing the door.

Lid Unlocking Issue

Error code: LdU
Meaning: The lid is unable to unlock.
Solution: Ensure there are no objects placed on top of the washing machine lid.

Washer Overload

Error code: OL
Meaning: The washer load is too large.
Solution: Reduce the amount of laundry in the washer.

Washer Fill Speed Issue

Error codes: LF, Lo FL, F8 E1
Meaning: The washer is filling with water too slowly.
Solution: Confirm that the water supply is turned on and check for kinks in the fill hose. If the issue persists, contact a repair service.

Unbalanced Washing Machine Load

Error code: Ofb
Meaning: The washer load is unbalanced.
Solution: Adjust and redistribute the laundry inside the drum to balance the load.

Find a RightFix Professional Near You

Get Professional Help Today!

Don’t let Whirlpool washing machine error codes disrupt your routine. Contact our Washer appliance repair specialists or book an appointment online to get your Whirlpool washing machine repaired quickly and efficiently.