Refrigerator Repair
Dishwasher Repair
Washer Repair
Electric Dryer Repair
Oven Repair
Stove/Cooktop Repair
Freezer Repair
Appliance Installation
Gas Appliance Repair
Your Local Repair Technicians
Common Gas Oven/Stove/Cooktop/Dryer issues we solve
- Oven: won’t reach set temperature / no heat
- Oven: igniter glows but the burner doesn’t light
- Stove: constant clicking but no flame
- Stove: weak or yellow flame (air–fuel mix issue)
- Cooktop: intermittent or delayed ignition
- Cooktop: flame cuts out when lowering heat
- Dryer: no heat; clothes stay damp
- Dryer: burner lights then shuts off quickly (coils/flame sensor)
Our Happy Customers
Types of Gas Appliances We Deal With
Gas Oven
Gas Stove
Gas Cooktop
Gas Dryer
Gas Cooktop repair
Built-in cooktops develop their own quirks—intermittent ignition, cross-lighting between burners, or soot on cookware. We repair switches, valves, spark wiring, and regulators, then balance the flame pattern across all zones.
Common problems we fix:
-
Delayed or intermittent ignition; clicking continues after lighting
-
Flame cuts out when reducing heat; uneven or noisy flame
-
Cross-lighting between burners; soot or discoloration on pans
-
Broken/loose knobs; faulty spark switches or harness
Gas Oven repair
An oven that won’t heat or bakes unevenly can derail dinner plans fast. We service glow-bar and spark ignition systems, temperature sensors (RTDs), thermostats, door gaskets, and control boards. After repairs, we calibrate temperature and verify safe combustion so your roasts and bakes come out consistent.
Common problems we fix:
-
Won’t reach set temperature, slow preheat, or heat loss mid-cycle
-
Igniter glows/sparks but burner never lights; frequent clicking
-
Uneven baking, hot spots, or scorched bottoms
-
Error codes, unresponsive controls, or faulty convection fan
-
Door won’t seal properly (worn gasket/hinges) leading to heat escape
Gas Stove repair
Stove frustrations usually point to ignition, fuel–air mix, or burner cleanliness. We deep-clean and realign ports, service spark modules and electrodes, and adjust regulators for a stable flame from low simmer to full boil.
Common problems we fix:
-
Constant clicking with no flame; one or more burners won’t light
-
Weak, yellow, or lifting flames; flame goes out at low settings
-
Clogged or damaged burner caps/ports; gas odor at a single burner
-
Knobs/valves hard to turn; control panel glitches
Gas Dryer repair
Dryers should deliver warm, even airflow. If loads stay damp or cycles drag on, the culprit may be ignition coils, a flame sensor, thermostats, or vent restriction. We restore safe heat, optimize airflow, and verify exhaust performance.
Common problems we fix:
-
No heat or short-cycling flame (lights then shuts off)
-
Long dry times due to vent blockage or weak airflow
-
Igniter glows but burner won’t ignite; repeated high-limit trips
-
Drum turns but only cold air; control/thermostat faults
Oven/Stove/Cooktop/Dryer Brands We Deal With
Oven/Stove/Cooktop/Dryer Repair Service Areas
